Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
Go to the Teton County Geographical Information System and under Property Search type in your address, click on the Fire Zones layer on the right bar. If your property is in the red area, you are in the WUI zone. The letters in the blocks do not pertain to the code, but indicate the referenced information for evacuation plans within the County Wildfire Protection Plan (under revision as of August 2013).
Show All Answers
An adopted series of the International Code Council’s set of codes, the Wildland Urban Interface code addresses any area where human-made improvements are built close to, or within, natural terrain and flammable vegetation, and where a significant potential for wildland fire exists. Teton County adopted this code in 2006.
Contact the Fire Department for a WUI review, 307-733-4732. This review will become part of the construction documents required for permitting. A fire inspector will be happy to discuss the requirements with you or your general contractor.
Only your addition over 500 square feet is required to meet the WUI code (per 2012 code adoption). Contact the Fire Department for a Wildland Urban Interface review at 307-733-4732. This review will become part of the construction documents required for permitting. A fire inspector will be happy to discuss the requirements with you or your general contractor.
Radiant and direct heat from wild land fires expand the gas within the above-ground tanks. This expansion causes tanks to vent off live gas, adding fuel and heat to the fire. A buried tank will not heat up in a wild land fire. All utilities must be underground per county ordinances.
The city allows burning for two weeks every spring. Please contact dispatch before burning.